![]() ![]() Now that the ARC connection has been established, you can enjoy high quality audio from your TV, soundbar or AV receiver. When the ARC feature is turned on, you should see a message on the TV screen indicating that the connection has been established. Once the output screen is displayed, you’ll need to select ‘Audio System’ or ‘Audio Out’ and then select ‘ARC’ from the available options. Depending on the device, this can be done by accessing the device’s menu and navigating to the audio or output settings page. Once you confirm the connection is compatible and both devices are turned on, you’ll need to establish the ARC connection. If using HDMI, then your device should support ARC, though not all HDMI ports will be compatible. ![]() Make sure both devices are powered on, then locate the appropriate video/audio output port on both devices. Firstly, ensure that the TV, soundbar or AV receiver you are using is compatible with ARC. If you need to reset your ARC (audio return channel) connection, there are a few steps you can take. If the issue persists, it may be necessary to contact a technician to further diagnose the issue. Make sure they are all plugged into a working electrical outlet and that the outlets are not overloaded. Finally, if the above steps are successful and you’re still experiencing issues with HDMI ARC, there could be an issue with the power source of your devices. If you need to enable them, do so, ensuring that the HDMI ARC output is active and connected to the TV. Look up the manual for your device and confirm it is compatible with HDMI ARC and that the ARC settings are enabled. The next step is to ensure your soundbar or AV receiver is compatible with HDMI ARC and is properly set up. If it is not set to receive audio from the ARC output, change the setting to enable it. If all cables and connections are intact and working correctly, the next step is to make sure your TV is set up for ARC.Ĭheck your TV’s audio settings to ensure that it is set to receive audio from the ARC output of your soundbar or AV receiver. You can also check the HDMI cables for any physical damage or corrosion, as this could be causing the issue. Make sure all the HDMI cables connected between your components are properly connected and in working order. The first step in fixing HDMI ARC not working is checking all the cables and connections involved. Once you’ve enabled HDMI ARC on your Samsung TV, you can enjoy the latest audio technology and control your sound system with ease. Make sure you’ve selected the correct external sound system from the settings menu, then try again.Īdditionally, if you have a digital optical sound system instead of HDMI-CEC, you will need to use an optical cable to connect your TV and sound system. If your external sound system still isn’t appearing, try disconnecting and reconnecting the HDMI cable from the TV and sound system. You should now be able to control your external sound system with your Samsung TV remote. ![]() Once you’ve selected it, select ‘HDMI ARC’ from the list below and then press ‘confirm’. Here you can choose your external sound system from the list of available audio output devices. On the left-hand side, select ‘Sound’ and then ‘Sound Output’. The next step is to turn on the TV and go to the settings menu. When both devices have the right type of HDMI connection, you’re ready to enable ARC. ![]() The sound system will usually have an HDMI-CEC compatible port labelled ‘ARC’ or something similar, while the TV’s HDMI-CEC connection is usually found on the same port as where you plug in the cable box or other device. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |